How can we help?
-
Guides
-
Examples
-
- Dipole Antenna
- Half-Wave Dipole
- Folded Dipole
- Top-Loaded Short Monopole
- Monopole Above Earth Ground
- Radio Mast Above Wire Screen
- Square Loop Antenna
- Receiving Loop Antenna
- Magnetic Loop Antenna
- ISM 433MHz Helical Antenna
- Multiband J-Pole Antenna
- Modeling a J-Fed 5-Element Collinear Antenna for the 2 m Band
-
Validation
< All Topics
Print
Modifying a Wire
Updated
Right-clicking on a wire brings up a menu. Choosing the Modify command from the pop-up menu > shows the Modify dialog box, where the geometrical parameters and attributes of the selected wire can be modified.
The Modify command can also be chosen by first selecting a wire by left clicking on it, and next going to Edit > Modify in the main menu. This option is enabled when the Select Wire button (arrow icon) in the main toolbar is pressed.
When a wire is modified, all sources and loads placed on it are removed. To modify a wire without removing the sources and loads, select the wire using the selection box, as explained in Modifying a group of wires >.
Table of Contents