How can we help?
-
Guides
-
Examples
-
- Dipole Antenna
- Half-Wave Dipole
- Folded Dipole
- Top-Loaded Short Monopole
- Monopole Above Earth Ground
- Radio Mast Above Wire Screen
- Square Loop Antenna
- Receiving Loop Antenna
- Magnetic Loop Antenna
- ISM 433MHz Helical Antenna
- Multiband J-Pole Antenna
- Modeling a J-Fed 5-Element Collinear Antenna for the 2 m Band
-
Validation
< All Topics
Print
Calculating the Near E-Field
Updated
Once the current distribution on the structure has been obtained, the near electric field at those points in space set in the Near-Field panel > of the Setup tabsheet can be computed.
Go to Run > Run Near E-Field in the main menu to run the calculation of the near electric field, Fig. 1. This command is only enabled when the current distribution has already been calculated.

Tips
- To run the calculation of the current distribution and the near fields sequentially and automatically, click on the Run Currents and Near-Field (F12) button on the toolbar. This command also runs the calculation of the near H-Field.
- To avoid the calculation of the H-Field, go to main menu > Tools > Preferences > Options > and uncheck the “Run ALL” also calculates the H-Field option.
Table of Contents