How can we help?
-
Guides
-
Examples
-
- Dipole Antenna
- Half-Wave Dipole
- Folded Dipole
- Top-Loaded Short Monopole
- Monopole Above Earth Ground
- Radio Mast Above Wire Screen
- Square Loop Antenna
- Receiving Loop Antenna
- Magnetic Loop Antenna
- ISM 433MHz Helical Antenna
- Multiband J-Pole Antenna
- Modeling a J-Fed 5-Element Collinear Antenna for the 2 m Band
-
Validation
< All Topics
Print
Calculating the Current Distribution
Updated
When the frequencies, the environment, the geometry, and the excitation are set, AN-SOF is ready to compute the currents flowing on the wire segments.
Go to Run > Run Currents in the main menu to run the calculation of the current distribution, Fig. 1.

Tip
When we are modeling a transmitting antenna and we only need the input impedance, this command allows us to save time since the radiated field is not calculated.
Table of Contents