How can we help?
-
Guides
-
Examples
-
- Dipole Antenna
- Half-Wave Dipole
- Folded Dipole
- Top-Loaded Short Monopole
- Monopole Above Earth Ground
- Radio Mast Above Wire Screen
- Square Loop Antenna
- Receiving Loop Antenna
- Magnetic Loop Antenna
- ISM 433MHz Helical Antenna
- Multiband J-Pole Antenna
- Modeling a J-Fed 5-Element Collinear Antenna for the 2 m Band
-
Validation
-
- Impedance of Cylindrical Antennas
- Convergence of the Dipole Input Impedance
- Dipole Gain and Radiation Resistance
- Enhanced Methodology for Monopoles Above Radial Wire Ground Screens
- Directivity of V Antennas
- Validating Panel RBS Antenna with Dipole Radiators against IEC 62232
- Simple Dual Band Vertical Dipole for the 2m and 70cm Bands
< All Topics
Print
Calculating the Far Field
Updated
Once the current distribution on the structure has been obtained, the far-field in the angular ranges set in the Far-Field panel > of the Setup tabsheet can be computed.
Go to Run > Run Far-Field in the main menu to run the calculation of the far-field, Fig. 1. This command is only enabled when the current distribution has already been calculated.

Tip
To run the calculation of the current distribution and the far field sequentially and automatically, click on the Run Currents and Far-Field (F11) button on the toolbar.
Table of Contents