How can we help?
-
Guides
-
Examples
-
- Dipole Antenna
- Half-Wave Dipole
- Folded Dipole
- Top-Loaded Short Monopole
- Monopole Above Earth Ground
- Radio Mast Above Wire Screen
- Square Loop Antenna
- Receiving Loop Antenna
- Magnetic Loop Antenna
- ISM 433MHz Helical Antenna
- Multiband J-Pole Antenna
- Modeling a J-Fed 5-Element Collinear Antenna for the 2 m Band
-
Validation
< All Topics
Print
H-Field Option in Preferences
Updated
We see that most of the time we are interested in calculating only the E-field in antenna projects when we are talking about the near field. For this reason, we have added an option to enable or disable the automatic calculation of the H-field when we click on the “Run ALL” (F10) button. Go to Tools > Preferences > Options tab.
If we are only interested in the near field and we don’t want to waste time calculating the far field, we can click on the “Run Currents and Near-Field” (F12) button.
In the “Run” menu we also have the options: “Run Far-Field”, “Run Near E-Field” and “Run Near H-Field” to calculate each field separately.

Table of Contents