How Can We Help?

Search for answers or browse our Knowledge Base.

The Antenna Lab | The Ham's Corner | Advanced RF Edge

Category - Incident Field

Learn how to configure an excitation by an incident plane wave field in AN-SOF.

Articles

Excitation by an Incident Field
To choose an incident plane wave as excitation of the structure, go to the Setup tab > Excitation panel and select the Incident Field option...
Incident Field Parameters
The following incident field parameters can be set in the Excitation panel of the Setup tabsheet after clicking on the Incident Field option...
The 3D-View Interface
The 3D-View interface provides an intuitive, graphical method for configuring incident field parameters, allowing you to visualize the direction and polarization of the incoming wave relative to your structure. Step-by-Step Configuration Why Use 3D-View? Using the graphical interface is highly recommended for complex geometries where the “Plane of Incidence” might be difficult to visualize numerically. […]